Vehicle Dynamics Blockset Project Templates - MATLAB & Simulink - MathWorks Australia

Vehicle Dynamics BlocksetProject Templates

Vehicle Dynamics Blockset™ provides preassembled vehicle dynamics models that you can use to analyze the dynamic system response to common ride and handling tests. Use the templates to create vehicle dynamic model variants for the maneuver reference applications. Open project files that contain the vehicle models from the Simulink^®start page.

In Simulink, on theSimulationtab, selectNew>Project>New Project.
In the Simulink start page, browse to Vehicle Dynamics Blockset and selectPassenger 3DOF Vehicle,Passenger 7DOF Vehicle, or乘客14自由度车辆.
In the Create Project dialog box, in项目名称, enter a project name.
InFolder, enter a project folder or browse to the folder to save the project.
ClickOK.
If the folder does not exist, the dialog box prompts you to create it. ClickYes.
The software compiles the project and populates the project folders. All models and supporting files are in place for you to customize your vehicle dynamics model.

This table summarizes the vehicle dynamics project templates.

Vehicle Model

Description

Vehicle Body Degrees-of-Freedom (DOFs)

Wheel DOFs

乘客14自由度车辆

Vehicle with four wheels
Available as model variant in the maneuver reference applications

Six

Translational		Rotational
Longitudinal	✓	Pitch	✓
Lateral	✓	Yaw	✓
垂直	✓	Roll	✓

Two per wheel - eight total

Translational		Rotational
垂直	✓	Rolling	✓

Passenger 7DOF Vehicle

Vehicle with four wheels
Available as model variant in the maneuver reference applications

Three

Translational		Rotational
Longitudinal	✓	Pitch
Lateral	✓	Yaw	✓
垂直		Roll

One per wheel - four total

Rotational
Rolling	✓

Passenger 3DOF Vehicle

Vehicle with ideal tire

Three

Translational		Rotational
Longitudinal	✓	Pitch
Lateral	✓	Yaw	✓
垂直		Roll

None

Vehicle Dynamics BlocksetProject Templates

Related Topics