Introduction

The MATLAB Support Package for LEGO MINDSTORMS EV3 Hardware enables you to interact with LEGO MINDSTORMS EV3 hardware from within MATLAB. You can use MATLAB scripts to implement more complex functionality for EV3 hardware.

This example demonstrates a collision alarm implementation with EV3 brick and Ultrasonic sensor. As an object gets closer to the Ultrasonic sensor, the EV3 brick generates a higher-pitched alarm sound.

Prerequisites

CompleteGetting Started with MATLAB® Support Package for LEGO® MINDSTORMS® EV3™ HardwareandInteract with EV3 Brick Peripherals, Read Sensor Values, and Control Motorsexamples.

Required Hardware

This example requires additional hardware:

Task 1 - Set Up Hardware

1. Follow the instructions inGetting Started with MATLAB Support Package for LEGO MINDSTORMS EV3 Hardwareexample to set up communication between your host computer and EV3 brick.

2. Connect Ultrasonic sensor to an input port of EV3 brick.

Task 2 - Open and Run Collision Alarm MATLAB Script

1. Open the collision alarm script template

edit('collision_alarm.m')

2. Run script.

ClickRunbutton to run the collision alarm script.

Task 3 - Other Things to Try

Reset the detection range by changing

RANGE = 0.3

the value of RANGE from 0.3 meters to another value, such as 0.5 meters.

Rerun the script to observe the behavior change.

Task 4 - Stop Collision Alarm

按按钮退出whil EV3起来e-loop and stop the script, which is implemented as

while ~readButton(mylego, 'up')

Summary

This example demonstrates using a MATLAB script that to implements a collision alarm. You learned the basic MATLAB script framework to implement more complex functionality for EV3 hardware.