Run on Target Hardware

Run model on target hardware, such as Raspberry Pi™ and BeagleBone^®Black boards

After you design your RTL-SDR model, you can generate an executable file for validation and testing on the target hardware. You can run this file in external mode or as a standalone application on the external hardware.

For successful execution of your SDR model with RTL-SDR hardware and the target hardware, you must have this software installed:

Communications Toolbox™ Support Package for RTL-SDR Radio(for all targeted hardware)
金宝app^®Support Package for Raspberry Pi Hardware(for Raspberry Pi hardware)
Embedded Coder^®Support Package for BeagleBone Black Hardware(for BeagleBone Black hardware)

See the documentation for each support package for hardware requirements and any additional software requirements.

Note

This feature is supported for Simulink only.

Topics

Signal Monitoring and Parameter Tuning
Use Simulink Monitor Signals & Tune Parameters feature (also called External Mode) to connect your Simulink block diagram to your application that runs the model on the target hardware.
Run Model as Standalone Application
You can prepare, configure, and run a model on your target hardware.

Related Information

Featured Examples

Airplane Tracking Using ADS-B Signals with Raspberry Pi and RTL-SDR

Create a remote sensing station that tracks planes using a Raspberry Pi™ and RTL-SDR radio. You will learn how to deploy a Simulink® model that processes Automatic Dependent Surveillance-Broadcast (ADS-B) signals and sends the demodulated data to a host PC using UDP packets for visualization.

Open Script

FM Reception with RTL-SDR Radio on Raspberry Pi Hardware

Build an FM mono receiver using a Raspberry Pi™ and RTL-SDR radio. You will learn how to deploy a Simulink® model that processes FM broadcast signals and play the audio through the Raspberry Pi's speaker.

Open Model

TV White Space Monitor with RTL-SDR Radio on Raspberry Pi Hardware

使用一个RTL-SDR无线电连接到一个覆盆子πhardware with Simulink® and Communications Toolbox® to monitor TV white space signal levels. To run this example, you need to install Communications Toolbox Support Package for RTL-SDR Radio and Simulink Support Package for Raspberry Pi Hardware.

Open Model

ThingSpeak™ TV White Space Monitor with RTL-SDR Radio on Raspberry Pi

使用一个RTL-SDR无线电连接到一个覆盆子πhardware with Simulink® and Communications Toolbox® to monitor TV white space signal levels and publish the data to the Internet using ThingSpeak. To run this example, you need to install Communications Toolbox Support Package for RTL-SDR Radio and Simulink Support Package for Raspberry Pi Hardware. You can view the published data in TV White Space Monitor Channel of ThingSpeak.

Open Model