Main Content

Model Configuration Parameters forBeagleBone黑色的硬件板

Hardware Implementation Pane Overview

  1. In the Simulink®Editor, selectSimulation>Model Configuration Parameters.

  2. In the Configuration Parameter dialog box, clickHardware Implementation.

  3. Set theHardware boardparameter toBeagleBone Black.

  4. The parameter values underHardware board settingsare automatically populated to their default values.

    You can optionally adjust these parameters for your particular use case.

  5. ClickApplyto apply the changes.

For more information on selecting a hardware support package and general configuration settings, seeHardware Implementation Pane(Simulink).

Operating system options

Parameter Description Default Value

Base Rate Task Priority

Sets the static priority of the base rate task in the operating system.

40

Board Parameters

Parameter Description Default Value

Device Address

Set the IP address of the hardware board on your network.

192.168.7.2

Username

Set the root username of the Linux operating system on the hardware board.

root

Password

Set the root password of the Linux operating system password on the hardware board.

empty

Build options

Parameter Description Default Value

Build action

Defines howSimulink Coder™responds when you build your model.

Build, load, and run

Clocking

Parameter Description Default Value

CPU Clock Frequency

The CPU clock frequency in MHz.

1000

外部模式

Parameter Description Default Value

Communication interface

Transport layer used to exchange data between the development computer and hardware.

TCP/IP

Run external mode in a background thread

Force the external mode engine in the generated code to execute in a background task.

disabled

Port

Port number on the hardware board.

17725

Verbose

Enable view of the external mode execution progress and updates in the Diagnostic Viewer.

disabled