Main Content

金宝appEDA工具和硬件支持

Supported Tools

Use this support package with:

  • Xilinx®Vivado®2020.1

  • Xilinx ISE 14.7

For tool setup instructions, seehdlsetuptoolpath.

See alsoHDL Language Support and Supported Third-Party Tools and Hardware.

Supported Boards

HDL Coder™ can generate code from your algorithm in Simulink®or MATLAB®and deploy it to standalone FPGA boards. Use:

  • IP Core Generationto generate an HDL IP core for your algorithm in MATLAB or Simulink, and then integrate the IP core into the default system reference design or your own custom reference design that you register for the board. This workflow supports Xilinx Kintex®-7 series and the newer FPGA families.

  • FPGA Turnkeyto generate HDL code for your algorithm in Simulink or MATLAB, and the FPGA top level wrapper HDL code for running your design on a standalone FPGA board. This workflow supports Xilinx ISE-based FPGA boards. For FPGA development boards that have more than one FPGA device, only one such device can be used with FPGA Turnkey.

To use these workflows, you must have a supported FPGA board connected to your MATLAB host computer using a supported connection type, and a supported synthesis tool.

Device Family Board IP Core Generation FPGA Turnkey
Spartan®-3A DSP Spartan-3A DSP 1800A development board X
Spartan-6 Spartan-6 SP605 development board X

Xilinx Virtex®-4

 Virtex-4 ML401 X
Virtex-4 ML402 X

Xilinx Virtex-5

 Virtex-5 ML506 development board X

Xilinx Virtex-6

 Virtex-6 ML605 development board X

Xilinx Kintex-7

 Kintex-7 KC705 development board X

When you use theIP Core Generationworkflow, you can add support for custom boards. For more information, seeBoard and Reference Design Registration System.

The board and reference design plugins that are used in theAccess DUT Registers on Xilinx Pure FPGA Board Using IP Core Generation Workflowserves as an example when you add support for your own custom board.

Related Topics