Create and Customize IBIS-AMI Models

Customize, create, and export IBIS-AMI models from Simulink

Use theSerDes Designer应用基于statistica开发并行转换器系统l BER analysis. Export the SerDes system to a Simulink^®environment.

Customize the building blocks to perform further statistical and time-domain analysis. Modify the AMI parameters to transfer them to AMI model executables (DLLs). Once you are satisfied with the system, you can generate the IBIS-AMI model from Simulink.

Apps

SerDes Designer

Design and analyze SerDes systems for export to金宝app,MATLABand IBIS-AMI

Topics

SiSoft Link
Test IBIS-AMI SerDes models in SiSoft^®Quantum Channel Designer^®(QCD) or Quantum Signal Integrity (QSI™) software.
Signal Integrity Link
This example shows how to test the IBIS-AMI SerDes models developed in SerDes Toolbox™ using the Signal Integrity Toolbox™.

Featured Examples

Managing AMI Parameters

Add, delete, modify, rename and hide AMI parameters for an IBIS-AMI model built with SerDes Toolbox. These AMI parameters are then available to be used with existing datapath blocks, user-created MATLAB function blocks or optimization control loop, and can be passed to or returned from the AMI model executables (DLLs) created by SerDes Toolbox.

Open Script

Design IBIS-AMI Models to Support Clock Forwarding

Create Rx AMI models that support clock forwarding as defined in the IBIS 7.1 specification by modifying the library blocks in SerDes Toolbox™. This example will use a DDR5 write transfer (Controller to SDRAM) to demonstrate the setup.

Open Live Script

Design IBIS-AMI Models to Support DC Offset

Create Rx AMI models that support DC Offset as defined in the IBIS Buffer Issue Resolution Document (BIRD) 197.7 by modifying the library blocks in SerDes Toolbox™. This example will use a DDR5 read transfer (SDRAM to Controller) to demonstrate the setup.

Open Live Script

Simulate Crosstalk Cancellation in IBIS AMI Receiver Models

Simulate crosstalk cancellation in a SerDes Rx AMI model. You can disable crosstalk cancellation or select a specific aggressor column in the impulse_matrix to cancel. You can also replace the the filter used in the example cancellationFilter.m with a CTLE that represents the filter implemented in the hardware.

Open Live Script