金宝appPreferences Editor Pane
金宝appEditor Preferences Overview
Configure the Simulink®编辑。这些选项会影响所有Simulink模型的行为。金宝app这些选项与模型如何按照视觉主题,滚轮行为和工具栏配置有关。
See Also
Use classic diagram theme
Option to cause diagrams to appear in the Simulink Editor using the visual theme that was used in the editor before R2012b.
设置
Default:离开
- 上
-
Uses the visual theme that was used in the Simulink Editor before R2012b. Content preview does not display.
- 离开
-
Uses the current Simulink Editor visual theme.
命令行信息
范围:EditorModernTheme |
价值:'on' |'离开' |
Default:'on' |
See Also
For additional information, see建造和Edit a Model Interactively.
线交叉风格
Change the default display for signal lines that cross.
设置
Default:隧道
-
隧道
-
Causes straight signal lines that cross each other but are not connected to display a slight gap before and after the vertical line where it intersects the horizontal line.
-
Line Hop
-
显示垂直线相交水平线的弯曲。金宝appSimulink调节弯曲的侧面,以避免与块图标重叠。如果将两侧的弯曲与一个块重叠,则Simulink使用实线。金宝app
-
没有任何
-
Uses solid lines. This format can improve performance slightly for updating very large models. With theUse classic diagram theme启用首选项,Simulink使用了实线。金宝app
命令行信息
范围:EditorPathXStyle |
价值:'grad_pin' |'跳' |'none' |
Default:'grad_pin' |
See Also
For additional information, see建造和Edit a Model Interactively.
Scroll wheel controls zooming
Option to use the scroll wheel on the mouse to zoom without theCtrl关键修饰符。上Macintosh带有An的平台Apple魔术触控板,如果您启用Scroll wheel controls zooming,一个平移手势会导致变焦。
设置
Default:上
- 上
-
Enables using the mouse scroll wheel to zoom without using a key modifier. OnMacintosh带有An的平台AppleMagic Trackpad, enables pan to zoom.
- 离开
-
Enables zooming by using theCtrl用滚动轮键。
命令行信息
范围:editorsCrollWheelZooms |
价值:'on' |'离开' |
Default:'on' |
See Also
有关缩放的更多信息,请参阅Zoom and Pan.
Content preview displays for new hierarchical elements
Option to display the contents of hierarchical model elements, such as subsystems, on new elements.
设置
Default:上
- 上
-
Displays the contents of hierarchical model elements, such as subsystems, on new elements. This preference does not affect existing elements in your model.
- 离开
-
不显示contents of hierarchical model elements.
命令行信息
范围:EditorContentPreviewDefaulton |
价值:'on' |'离开' |
Default:'on' |
See Also
You can also turn content preview on and off for each hierarchical element in your model. For detailed information on content preview, see模型组件的预览内容.
启用智能编辑功能
Option to enable the use of smart editing cues to perform common model editing tasks quickly. These are the smart editing features affected by this option:
Quick insert — Add a block to a model by typing a block name.
增加撕裂块 - 添加一个从块撕裂提示中添加一个互补的块。例如,当您添加一个去block, you can use a tear-off to add a corresponding从block.
Multiselection actions — Perform actions from the prompt that appears when you select multiple blocks.
Single-selection actions — Perform actions from the prompt that appears when you select a block or a signal.
设置
Default:上
- 上
-
Enables smart editing cues.
- 离开
-
Disables smart editing cues.
命令行信息
范围:编辑 |
价值:'on' |'离开' |
Default:'on' |
See Also
有关更多信息,请参阅建造和Edit a Model Interactively.
Edit key parameter when adding new blocks
Option to be prompted to enter a key parameter when you add a block to a model.
设置
Default:上
- 上
-
Enables the prompt to enter a key parameter when adding a block to a model.
- 离开
-
在将块添加到模型时,请禁用提示以输入密钥参数。
命令行信息
范围:EditorSmartedingHotParam |
价值:'on' |'离开' |
Default:'on' |
See Also
有关使用密钥参数的示例,请参见Add More Blocks.
工具栏配置
指定显示工具栏上的按钮。有关更多信息,请参阅以下选项:
File Toolbar
指定与打开,保存和创建有关以在工具栏上显示的按钮。
设置
Default:新/开放/保存
-
新/保存
-
Displays the新的和节省buttons on the toolbar.
-
新/开放/保存
-
Displays the新的,Open, 和节省buttons on the toolbar.
-
没有任何
-
不会在工具栏上显示任何与文件相关的按钮。
命令行信息
范围:ToolbarVisibilities |
Type:struct |
字段名称:新的节省 |
价值:'on' |'离开' |
Default:'离开' |
字段名称:新的OpenSave |
价值:'on' |'离开' |
Default:'on' |
See Also
有关Simulink编辑器中编辑的更多信息,请参见金宝app建造和Edit a Model Interactively.
Specify whether to show thePrintbutton on the toolbar.
设置
Default:离开
- 上
-
Displays thePrintbutton on the toolbar.
- 离开
-
不显示Printbutton on the toolbar.
命令行信息
范围:ToolbarVisibilities |
Type:struct, field name:Print |
价值:'on' |'离开' |
Default:'离开' |
See Also
有关打印的信息,请参阅打印模型图.
剪切/复制/粘贴
Specify whether to show theCut,复制, 和Pastebuttons on the toolbar.
设置
Default:上
- 上
-
Displays theCut,复制, 和Pastebuttons on the toolbar
- 离开
-
不显示Cut,复制, 和Pastebuttons on the toolbar.
命令行信息
范围:ToolbarVisibilities |
Type:struct, field name:造型类型 |
价值:'on' |'离开' |
Default:'on' |
撤销重做
Specify whether to show the撤消和Redobuttons on the toolbar.
设置
Default:离开
- 上
-
Displays the撤消和Redobuttons on the toolbar.
- 离开
-
不显示撤消和Redobuttons on the toolbar.
命令行信息
范围:ToolbarVisibilities |
Type:struct, field name:撤消Redo |
价值:'on' |'离开' |
Default:'离开' |
See Also
有关Simulink编辑器中编辑的更多信息,请参见金宝app建造和Edit a Model Interactively.
向后浏览/向前/向上
Specify whether to show the browsing buttons on the toolbar.
设置
Default:上
- 上
-
显示工具栏上的浏览,向前和向上箭头。
- 离开
-
不会在工具栏上显示浏览按钮。
命令行信息
范围:ToolbarVisibilities |
Type:struct, field name:Navigate |
价值:'on' |'离开' |
Default:'on' |
See Also
有关Simulink编辑器中编辑的更多信息,请参见金宝app建造和Edit a Model Interactively.
图书馆/Model Configuration/Model Explorer
Specify whether to show the图书馆,模型Configuration, 和模型Explorerbuttons on the toolbar.
设置
Default:上
- 上
-
Displays the图书馆,模型Configuration, 和模型Explorerbuttons on the toolbar.
- 离开
-
不显示图书馆,模型Configuration, 和模型Explorerbuttons on the toolbar.
命令行信息
范围:ToolbarVisibilities |
Type:struct, field name:图书馆Explorer |
价值:'on' |'离开' |
Default:'on' |
See Also
Refresh Blocks
Specify whether to show theRefresh Blocksbutton on the toolbar. Refreshing a模型block updates its internal representation to reflect changes in the interface of the model that it references.
设置
Default:离开
- 上
-
Displays theRefresh Blocksbutton on the toolbar.
- 离开
-
不显示Refresh Blocksbutton on the toolbar.
命令行信息
范围:工具键介绍性' |
Type:struct, field name:RefreshBlocks |
价值:'on' |'离开' |
Default:'离开' |
See Also
有关更多信息,请参阅刷新模型块.
Update Diagram
Specify whether to show theUpdate Diagrambutton on the toolbar.
设置
Default:离开
- 上
-
Displays theUpdate Diagrambutton on the toolbar.
- 离开
-
不显示Update Diagrambutton on the toolbar.
命令行信息
范围:'ToolbarVisibilities |
Type:struct, field name:UpdateDiagram |
价值:'on' |'离开' |
Default:'离开' |
See Also
有关更多信息,请参阅Update Diagram and Run Simulation.
模拟
指定是否在工具栏上显示模拟控件。
设置
Default:上
- 上
-
Displays the simulation controls on the toolbar.
- 离开
-
不显示simulation controls on the toolbar.
命令行信息
范围:ToolbarVisibilities |
Type:struct, field name:模拟 |
价值:'on' |'离开' |
Default:'on' |
See Also
有关模拟的信息,请参阅交互模拟模型.
Fast Restart
Specify whether to show theFast Restartbutton with the simulation controls on the toolbar.
设置
Default:上
- 上
-
Displays theFast Restartbutton on the toolbar.
- 离开
-
不显示Fast Restartbutton on the toolbar.
See Also
有关快速重新启动的更多信息,请参阅Get Started with Fast Restart.
调试模型
Specify whether to show the调试模型button on the toolbar.
设置
Default:离开
- 上
-
Displays the调试模型button on the toolbar.
- 离开
-
不显示调试模型button on the toolbar.
命令行信息
范围:ToolbarVisibilities |
Type:struct, field name:DebugModel |
价值:'on' |'离开' |
Default:'离开' |
See Also
有关使用的更多信息调试模型, see启动Simulink金宝app调试器.
模型Advisor
Specify whether to show the模型Advisorbutton on the toolbar.
设置
Default:上
- 上
-
Displays the模型Advisorbutton on the toolbar.
- 离开
-
不显示模型Advisorbutton on the toolbar.
命令行信息
范围:ToolbarVisibilities |
Type:struct, field name:模型Advisor |
价值:'on' |'离开' |
Default:'on' |
See Also
For information on the Model Advisor, seeCheck Your Model Using the Model Advisor.
建造
Specify whether to show the建造button on the toolbar.
设置
Default:上
- 上
-
Displays the建造button on the toolbar.
- 离开
-
不显示建造button on the toolbar.
命令行信息
范围:ToolbarVisibilities |
Type:struct, field name:建造 |
价值:'on' |'离开' |
Default:'on' |
See Also
For more information on building models, see:
Source Code Generation(Embedded Coder)
生成的代码汇编(Embedded Coder)
寻找
Specify whether to show the寻找button on the toolbar.
设置
Default:离开
- 上
-
Displays the寻找button on the toolbar.
- 离开
-
不显示寻找button on the toolbar.
命令行信息
范围:ToolbarVisibilities |
Type:struct, field name:寻找 |
价值:'on' |'离开' |
Default:'离开' |
See Also
有关更多信息,请参阅发现者.