乔尔Van Sickel
数学工作
内容提要
回答
如何在MATLAB中建模和测量算法电位计
Hello Derek, the appropriate way to model potentiometer response is using Simscape. If you are having trouble with Simscape, I...
如何在MATLAB中建模和测量算法电位计
Hello Derek, the appropriate way to model potentiometer response is using Simscape. If you are having trouble with Simscape, I...
2个月前|0
回答
如果独立的太阳能光伏系统带有AC和DC负载,并带有电池备份
Hello Alisher, you can use that as a starting place, but it doesn't have any AC power in it. Modifying it is possible, but wou...
如果独立的太阳能光伏系统带有AC和DC负载,并带有电池备份
Hello Alisher, you can use that as a starting place, but it doesn't have any AC power in it. Modifying it is possible, but wou...
3 months ago | 0
回答
my firing angle on this triac does not work correctly ?
My first guess would be that you need to double the rate of your firing. It looks like you are triggering the first thyristor c...
my firing angle on this triac does not work correctly ?
My first guess would be that you need to double the rate of your firing. It looks like you are triggering the first thyristor c...
4个月前|0
回答
HDL Code Generation (Verilog) for a 2-D Lookup Table
您好,您可以浏览这样的示例来生成HDL:https://www.tatmou.com/help/help/hdlcoder/gs/example-generating-...
HDL Code Generation (Verilog) for a 2-D Lookup Table
您好,您可以浏览这样的示例来生成HDL:https://www.tatmou.com/help/help/hdlcoder/gs/example-generating-...
4个月前|0
回答
MATLAB软件可以模拟大型柴油发动机中燃烧的不同等级的燃料吗?
The tools could be used to create this type of simulation, but you'd have to build it from the ground up.
MATLAB软件可以模拟大型柴油发动机中燃烧的不同等级的燃料吗?
The tools could be used to create this type of simulation, but you'd have to build it from the ground up.
4个月前|0
回答
在将另一个输出添加到其输出时,来自Boost类型转换器的直流电压输出的问题。
It looks like you are using open loop control and the first converter is supplying it's original load PLUS the new load of the s...
在将另一个输出添加到其输出时,来自Boost类型转换器的直流电压输出的问题。
It looks like you are using open loop control and the first converter is supplying it's original load PLUS the new load of the s...
4个月前|1
回答
Can I cange the step size from fixed to variable after a certain simulation time?
Hello Annette, unfortunately, there is no way to do this. In general, it's best to only simulate a few cycles with the n-chann...
Can I cange the step size from fixed to variable after a certain simulation time?
Hello Annette, unfortunately, there is no way to do this. In general, it's best to only simulate a few cycles with the n-chann...
4个月前|0
回答
为什么我的Simulin金宝appk模型终止(Canbus Communication)而没有达到模拟的末尾?
Hello Zubair, if it works when the motors aren't screwed down, and isolated by tape, and fails when they are screwed down while...
为什么我的Simulin金宝appk模型终止(Canbus Communication)而没有达到模拟的末尾?
Hello Zubair, if it works when the motors aren't screwed down, and isolated by tape, and fails when they are screwed down while...
4个月前|0
回答
Lithium ion battery modelling
I would start with this blocK: //www.tatmou.com/help/physmod/sps/ref/batterytablebased.html this block will let you ch...
Lithium ion battery modelling
I would start with this blocK: //www.tatmou.com/help/physmod/sps/ref/batterytablebased.html this block will let you ch...
4个月前|0
回答
如何创建具有特定谐波的三相非线性负载3,5,7,9,11,15?
You would have to create those waveforms yourself using a controlled source. you could use simulink to add together different s...
如何创建具有特定谐波的三相非线性负载3,5,7,9,11,15?
You would have to create those waveforms yourself using a controlled source. you could use simulink to add together different s...
4个月前|0
回答
如何在没有范围图的情况下绘制整个模拟范围图,并金宝app通过模拟缓慢滴答。
Hello Mark, there is no way to get a plot without running the simulation as without the simulation, there is no data. You are ...
如何在没有范围图的情况下绘制整个模拟范围图,并金宝app通过模拟缓慢滴答。
Hello Mark, there is no way to get a plot without running the simulation as without the simulation, there is no data. You are ...
4个月前|0
回答
I can not find FACTS devices in SIMSCAPE Electrical 2021b.
A number of more complicated blocks have been moved to examples instead of librarly blocks. Please start by looking here: https...
I can not find FACTS devices in SIMSCAPE Electrical 2021b.
A number of more complicated blocks have been moved to examples instead of librarly blocks. Please start by looking here: https...
4个月前|0
回答
当我将较高的太阳辐照度输入我的太阳能电池时,它的电效率较低。这似乎不对吗?
您好Jason,此示例使用了一个非常简单的电气模型,该模型不使用MPPT。没有MPPT,效率不必要...
当我将较高的太阳辐照度输入我的太阳能电池时,它的电效率较低。这似乎不对吗?
您好Jason,此示例使用了一个非常简单的电气模型,该模型不使用MPPT。没有MPPT,效率不必要...
4个月前|0
回答
Matlab compiler - matlabruntimeforpython : "Dot indexing is not supported for variables of this type" when calling sim()
MATLAB编译器不支持SIM命令。金宝app您需要为此的Simulin金宝appk编译器,或者您需要使用Embedded Co ...
Matlab compiler - matlabruntimeforpython : "Dot indexing is not supported for variables of this type" when calling sim()
MATLAB编译器不支持SIM命令。金宝app您需要为此的Simulin金宝appk编译器,或者您需要使用Embedded Co ...
4个月前|0
|accepted
回答
Simulation of electric field of parallel plate capacitor
//www.tatmou.com/matlabcentral/fileexchange/37923-2d-electric-potential-field-in-parallel-plates-capacitor
Simulation of electric field of parallel plate capacitor
//www.tatmou.com/matlabcentral/fileexchange/37923-2d-electric-potential-field-in-parallel-plates-capacitor
4个月前|0
回答
如何为标称PI和T部分建模中型传输线
Hello Salah, to start, I would just set them to your positive sequence values (this is incorrect, but will get you started with...
如何为标称PI和T部分建模中型传输线
Hello Salah, to start, I would just set them to your positive sequence values (this is incorrect, but will get you started with...
4个月前|0
|accepted
回答
How to implement Induction motor to a system?
Hello Ozan, the best way to do this is to start over and use simscape to model the whole physical system so that you don't have...
How to implement Induction motor to a system?
Hello Ozan, the best way to do this is to start over and use simscape to model the whole physical system so that you don't have...
4个月前|0
回答
Why aging of generic battery model is inconsistent with respect to battery initial state-of-charge?
It looks like your data sets are following two linear lines and results fall either on the top or bottom one. If you look at yo...
Why aging of generic battery model is inconsistent with respect to battery initial state-of-charge?
It looks like your data sets are following two linear lines and results fall either on the top or bottom one. If you look at yo...
4个月前|0
|accepted
回答
Problem At Sistem On Chip (SOC,PIL) Example Application
如果上述评论者提出的软件建议不起作用,请考虑硬件/连接问题。你能发送照片吗?
Problem At Sistem On Chip (SOC,PIL) Example Application
如果上述评论者提出的软件建议不起作用,请考虑硬件/连接问题。你能发送照片吗?
4个月前|1
|accepted
回答
How to add a low Bandwidth Communication in Simulink
Hello Hussain, if you want the delay to be disreet, you can use a rate transition block to use unit delays at different time st...
How to add a low Bandwidth Communication in Simulink
Hello Hussain, if you want the delay to be disreet, you can use a rate transition block to use unit delays at different time st...
5个月前|0
回答
PV数组仿真的错误
Hello Jung, you are applying a constantly increasing voltage to the output of the solar cell, so you couldn't get a fixed volta...
PV数组仿真的错误
Hello Jung, you are applying a constantly increasing voltage to the output of the solar cell, so you couldn't get a fixed volta...
5个月前|0
回答
如何从压电弯曲器Simscape块中访问应力,应变和力矩变量,以用于模拟中?金宝app
您好克里斯托弗(Christopher),要查看Simulaiton之后的更多数据,您可以使用Simscape Results Explorer。右键单击压电...
如何从压电弯曲器Simscape块中访问应力,应变和力矩变量,以用于模拟中?金宝app
您好克里斯托弗(Christopher),要查看Simulaiton之后的更多数据,您可以使用Simscape Results Explorer。右键单击压电...
5个月前|1
回答
Open wound/winding induction motor model in Simulink/Simscape
Simscape Motor的定子两端都暴露了。这主要是为了确定它们是Wye还是Delta连接的,...
Open wound/winding induction motor model in Simulink/Simscape
Simscape Motor的定子两端都暴露了。这主要是为了确定它们是Wye还是Delta连接的,...
5个月前|0