Main Content

DALSASapera Hardware

TroubleshootingDALSASapera Devices

The Image Acquisition Toolbox™ software supports the use of DALSA®Sapera hardware.

If you are having trouble using the Image Acquisition Toolbox software with a supported DALSA Sapera frame grabber, try the following:

  1. Install the Image Acquisition Toolbox Support Package for DALSA Sapera Hardware.

    Starting with version R2014a, each adaptor is available separately through MATLAB®Add-Ons. SeeImage Acquisition Support Packages for Hardware Adaptorsfor information about installing the adaptors.

  2. Install the third-party hardware device driver separately and verify that it is compatible with Image Acquisition Toolbox. For the correct driver information, check the list of supported drivers for your MATLAB release underThird-Party RequirementsonTeledyne DALSA Support from Image Acquisition Toolbox.

    Note

    Image Acquisition Toolbox is compatible only with specific driver versions provided with the DALSA Sapera hardware and is not guaranteed to work with any other versions.

    Find out the driver version you are using on your system. To learn how to get this information, seeDetermining the Driver Version for DALSA Sapera Devices.

    If you discover that you are using an unsupported driver version, visit the Teledyne DALSA website to download the correct driver.

  3. Use theimaqhwinfofunction to verify if'dalsa'is listed.

    imaqhwinfo ans = struct with fields: InstalledAdaptors: {'dalsa' 'winvideo'} MATLABVersion: '9.4 (R2018a)' ToolboxName: 'Image Acquisition Toolbox' ToolboxVersion: '5.3 (R2018a)'

    In the example shown, the DALSA and WinVideo adaptors are present, meaning the DALSA and OS Generic Video Interface support packages are installed.

  4. Verify that you have a supported frame grabber. See a list of supported frame grabbers onTeledyne DALSA Support from Image Acquisition Toolbox.

  5. Verify that your image acquisition hardware is functioning properly.

    For DALSA Sapera devices, run the application that came with your hardware, the Sapera CamExpert, and verify that you can view a live video stream from your camera.

    如果您正在使用一个相机文件配置device, verify that the toolbox can locate your camera file. Make sure that your camera appears in theCameralist in the Sapera CamExpert. To test the camera, select the camera in the list, and click theGrabbutton.

  6. Make sure no other application is using the camera.

Determining the Driver Version forDALSASapera Devices

To determine the DALSA Sapera Library version you are using, view the release notes for the driver. You can access the release notes through the Windows®Startmenu.

  1. Click theStartbutton to open theStartmenu.

  2. Select程序> DALSA Coreco成像> Sapera LTto open theSapera LTmenu.

  3. SelectReadmeto view the Sapera release notes.