Is My Hardware Supported?

Supported Interfaces

仪器控制工具箱™支持使用o金宝appf instruments and communication via the following interfaces. The table lists the interface support by platform. Notes after the table contain more specific information.

Feature	64-bit MATLAB^®on Windows^®	64-bit MATLAB onmacOS	64-bit MATLAB on Linux^®
Serial	supported	supported	supported
TCP/IP	supported	supported	supported
UDP	supported	supported	supported
VISA³	supported¹	supported on two vendors^{1, 3}
GPIB⁴	supported¹		supported¹
I2C⁵	supported¹	supported¹	supported¹
SPI⁵	supported¹	supported¹	supported¹
Quick-Control Oscilloscope, Quick-Control Function Generator, Quick-Control RF Signal Generator	supported²	supported²	supported²
MATLAB Instrument Drivers	supported	supported	supported
MATLAB Instrument Drivers made using IVI-C drivers and Instrument Wrappers for IVI-C drivers	supported¹

Table Notes

1. Dependent on support by third-party vendor driver for the hardware on this platform.

2. Dependent on third-party vendor support of platform when using an IVI-driver with Quick-Control Oscilloscope or Quick-Control Function Generator.

3. Requires Keysight™ (formerly Agilent^®), National Instruments™, Rohde & Schwarz R&S VISA, or TAMS VISA compliant with VISA specification 5.0 or higher for any platform. Only National Instruments VISA and Rohde & Schwarz R&S VISA are supported onmacOS. The other vendors’ VISA support does not includemacOS.

4. Requires Keysight (formerly Agilent), ICS Electronics™, Measurement Computing™ (MCC), ADLINK Technology, or National Instruments hardware and driver.

5. Requires Aardvark or National Instruments hardware and driver.

Supported Hardware

SeeHardware Support from Instrument Control Toolboxfor a complete list of supported hardware.