Main Content

phaseNoiseToJitter

Measure RMS phase jitter from phase noise data

所有的页面崩溃

Syntax

[Jrms_rad,Jrms_deg] = phaseNoiseToJitter(PNFreq,PNPow)
[Jrms_rad,Jrms_deg, Jrms_s] = phaseNoiseToJitter(___,'Frequency',frequency)

Description

[Jrms_rad,Jrms_deg] = phaseNoiseToJitter(PNFreq,PNPow)returns the effective RMS phase jitter in radians and degrees from the phase noise frequency and power levels.

[Jrms_rad,Jrms_deg,Jrms_s] = phaseNoiseToJitter(___,'Frequency',frequency)also returns the effective RMS phase jitter in seconds when you specify the signal frequency in addition to the input arguments in the previous syntax.

Examples

collapse all

Open Live Script

Use a signal of 100 MHz frequency. The phase noise profile is:

  • -125 dBc/Hz at 100 Hz

  • -150 dBc/Hz at 1 kHZ

  • -174 dBc/Hz at 10 kHz

  • -174 dBc/Hz at 200 MHz

Calculate the effective RMS phase jitter in radian, degree and second.

PNFreq = [100,1e3,1e4,200e6]; PNPow = [-125,-150,-174,-174]; [Jrms_rad Jrms_deg Jrms_sec]=phaseNoiseToJitter(PNFreq,PNPow,'Frequency',100e6)
Jrms_rad = 4.0430e-05
Jrms_deg = 0.0023
Jrms_sec = 6.4346e-14

Input Arguments

collapse all

Frequency points relative to the fundamental frequency to which phase noise is calculated, specified as a real-valued vector in hertz.

Data Types:double

Phase noise power in 1-Hz bandwidth centered at the specified frequency offsets relative to the fundamental frequency, specified as a real-valued vector in dBc/Hz. The elements ofPNPowcorrespond to the elements ofPNFreq.

Data Types:double

Signal frequency, specified as a scalar in hertz. Signal frequency is used to calculate the RMS phase jitter in seconds.

Data Types:double

Output Arguments

collapse all

Effective RMS phase jitter, returned as a scalar in radians.

Effective RMS phase jitter, returned as a scalar in degrees.

Effective RMS phase jitter, returned as a scalar in seconds. To calculateJrms_s, define the signal frequency using Name-Value pair arguments.

版本历史

Introduced in R2020b

See Also