Heat Exchangers

Multi-domain heat exchangers

Use these blocks to model heat exchange between different domains or between topologically distinct networks.

Simscape Blocks

冷凝器蒸发器(2 p-ma)	Models heat exchange between a moist air network and a network that can undergo phase change
Condenser Evaporator (TL-2P)	Models heat exchange between a thermal liquid network and a network that can undergo phase change
Heat Exchanger (G-G)	Heat exchanger for systems with two gas flows
Heat Exchanger (G-TL)	Heat exchanger for systems with gas and thermal liquid flows
Heat Exchanger (G)	Heat exchanger for systems with gas and controlled flows
Heat Exchanger (TL)	Heat exchanger for systems with thermal liquid and controlled flows
Heat Exchanger (TL-TL)	Heat exchanger for systems with two thermal liquid flows
Heat Exchanger (TL-MA)	Models heat exchange between a moist air network and a thermal liquid network
System-Level Condenser Evaporator (2P-MA)	Heat exchanger between two-phase fluid and moist air networks, with model based on performance data
System-Level Condenser Evaporator (2P-TL)	Heat exchanger between two-phase fluid and thermal liquid networks, with model based on performance data
System-Level Heat Exchanger (2P-2P)	两个两相流体网络之间的热交换器s, with model based on performance data
System-Level Heat Exchanger (TL-MA)	Heat exchanger between thermal liquid and moist air networks, with model based on performance data

Fundamental Components

expand all

Fundamental Components

E-NTU Heat Transfer	Detailed heat transfer model between two general fluids
Heat Exchanger Interface (G)	Gas side of heat exchanger
Heat Exchanger Interface (TL)	Thermal interface between a thermal liquid and its surroundings
Simple Heat Exchanger Interface (G)	Thermal interface between a gas and its surroundings
Simple Heat Exchanger Interface (TL)	Thermal interface between a thermal liquid and its surroundings
Specific Dissipation Heat Transfer	Simple heat transfer model between two general fluids

Featured Examples

Condenser and Evaporator Heat Transfer

Models a condenser or an evaporator in simple test setup with R134a refrigerant on the left side and moist air on the right side. It has a cross flow arrangement with the moist air blowing across tube banks filled with the refrigerant.

Open Model

Hydraulic Oil System with Thermal Control

A hydraulic oil system with a thermal control using Simscape™ Fluids™ Thermal Liquid blocks. The hydraulic oil system consists of an oil storage tank represented by the Tank (TL) block with two inlets, a pump represented by a Mass Flow Rate Source (TL) block, and pipelines represented by Pipe (TL) block.

Open Model

Electric Vehicle Thermal Management

Models the thermal management system of a battery electric vehicle. The system consists of two coolant loops, a refrigeration loop, and a cabin HVAC loop. The thermal load are the batteries, powertrain, and cabin.

Open Model