The error when install the raspberry pi
120 ビュー (過去 30 日間)
表示 古いコメント
When I install the Raspberry Pi package, at the write firmware step a error happened. The error is : Error writing firmware to the memory card: An error occurred while writing to the SD card.
Is anyone meet this problem before?
How to solve the problem?
1 件のコメント
ivan nkwawir
2020 年 2 月 13 日
I faced similar issue and unfortunatey I have a mac. After severl tries and also trying what mathworks asked to do which was to delete a "img_writer_log.txt" file, I did a few times and that still didn't work. i ended up writing the filmware to the SD card using a software which i had called "ApplepiBaker", putting the SD card in ther raspberry pi, and plugging the raspberry pi to a monitor. that gave me the chance to manually connect to the internet and finally had matlab connected to it. So short cut was using a different filmwriter, writing to the SD card and manually connecting to the internet using a monitor.
回答 (6 件)
Karl Fetzer
2017 年 12 月 12 日
I had the same problem using Windows 10 and Matlab 2017b. I do not know what caused it, but I was able to stop the error from occurring by using SDFormatter (
https://www.sdcard.org/downloads/formatter_4/
) to reformat the SD card first, then using the Matlab Raspberry Pi hardware setup wizard.
John Carlson
2019 年 1 月 16 日
I had the same problem , I did a lot of wrong things but here is how it fixed :
1- run matlab as administrator
2 - OverWrite format the SD card with SD Card Formatter [it's a software]
3- follow normal steps
I did exacly as I wrote and the problem went away . [there was another problem after that , that was not connecting properly with LAN but I did the steps again and it was ok]
Murat Belge
2014 年 2 月 28 日
The error is not descriptive enough to diagnose what is happening. General trouble-shooting steps when writing to the SD card are:
1. Start MATLAB in administrator mode. 2. Check that the lock switch on the SD card is in
un-locked
的位置。3.确保SD card size has at least 4GB of storage space.
If you perform the above and you still get an error, try using a * Different SD card * Different SD card reader/writer
0 件のコメント
Silverio G. Cortes
2014 年 5 月 14 日
I got the same problem. I´ve tried with two different SD cards 16GB (Sandisk Class 4 and Lexar SDHC C10? 100x )
In addition I´ve also tried with the integrated SD car reader/wrtier of my laptop, and another portable USB card reader with no result (only the same error message: An error ocurred while unlocking the SD card volume. )
Could be a problem with the format type of the SD card? Any other suggestion?
0 件のコメント
参考
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!