Get Started withData Acquisition Toolbox

数据采集​​工具箱™提供用于配置数据采集硬件的应用程序和功能，将数据读入MATLAB^®and Simulink^®, and writing data to DAQ analog and digital output channels. The toolbox supports a variety of DAQ hardware, including USB, PCI, PCI Express^®, PXI^®, and PXI-Express devices, from National Instruments™ and other vendors.

The toolbox apps let you interactively set up a data acquisition interface and configure it to your hardware. You can then generate equivalent MATLAB code to automate your data acquisition. Toolbox functions give you the flexibility to control the analog input, analog output, counter/timer, and digital I/O subsystems of a DAQ device. You can access device-specific features and synchronize data acquired from multiple devices.

You can analyze data as you acquire it or save it for post-processing. You can also automate tests and make iterative updates to your test setup based on analysis results.

Tutorials

• The DataAcquisition Object
  

  Overview of DataAcquisition components and supported vendors.

• Acquire Data with the Analog Input Recorder
  

  Use theAnalog Input Recorderapp to visualize and record analog input signals.

• Generate Signals with the Analog Output Generator
  

  Use theAnalog Output Generatorapp to define and produce analog output signals.

About Data Acquisition

• Data Acquisition System
  

  Review the components of a typical data acquisition system.

• Analog Input Subsystem
  

  This hardware subsystem digitizes real-world sensor signals into numbers your computer can read.

• Making Quality Measurements
  

  Maximize precision and accuracy, minimize noise, and match the sensor range to the hardware range.

• Get Command-Line Help
  

  Get toolbox help in the Command Window.

Featured Examples

Getting Started with NI Devices

Get started with National Instruments devices from the command line.

Open Script

Getting Started with MCC Devices

Get started with MCC devices from the command line.

Open Script

Getting Started Acquiring Data with Digilent Analog Discovery

Acquire voltage data at a rate of 300 kHz. The input waveform is a sine wave (10 Hz, 2 Vpp) provided by an external function generator.

Open Script

Getting Started Generating Data with Digilent Analog Discovery

Generate voltage data at a rate of 300 kHz.

Open Script