课程时间表

Prerequisites

金宝app用于系统和算法建模的Simulink(or金宝app用于汽车系统设计的SIMULINK或者金宝appSimulink用于航空航天系统设计）。知识C编程语言。

嵌入式编码器for Production Code Generation

这是一个手头，为期三天的课程侧重于在Simulink中开发模型金宝app^®environment to deploy on embedded systems. The course is designed for Simulink users who intend to generate, validate, and deploy embedded code using Embedded Coder^®.

Topics include:

Generated code structure and execution
代码生成选项和优化
Integrating generated code with external code
生成代码的μltirate systems
Customizing generated code
Customizing data
部署代码

查看详细的课程大纲

Prerequisites

金宝app用于系统和算法建模的Simulink(or金宝app用于汽车系统设计的SIMULINK或者金宝appSimulink用于航空航天系统设计）。知识C编程语言。

Day 1 of 3
Generating Embedded Code	Objective:Configure Simulink models for embedded code generation and effectively interpret the generated code. Architecture of an embedded application System specification Generating code 代码模块记录中间信号 Data structures in generated code Validating generated code 嵌入式编码器^®build process
优化生成的代码	Objective:Identify the requirements of the application at hand and configure optimization settings to satisfy these requirements. 优化考虑因素 Removing unnecessary code 删除不必要的数据支持金宝app Optimizing data storage Profiling generated code Code generation objectives
Integrating Generated Code with External Code	Objective:Modify models and files to run generated code and external code together. 外部代码集成概述 Model entry points 创建执行线束 Integrating generated code into an external project Controlling code destination 包装生成的代码
Controlling Function Prototypes	Objective:自定义生成的代码中模型入口点的函数原型。默认模型功能原型 Modifying function prototypes 具有修改函数原型的生成代码 Model function prototype considerations Reusable function interface 功能默认值

Day 2 of 3
Customizing Data Characteristics in Simulink^®	Objective:Control the data types and storage classes of data in Simulink. 数据特征 Data type classification Simulink data type configuration Setting signal storage classes Setting state storage classes Impact of storage classes on symbols
Customizing Data Characteristics Using Data Objects	Objective:Control the data types and storage classes of data using data objects. 金宝app^®data objects overview Controlling data types with data objects Creating reconfigurable data types Controlling storage classes with data objects Controlling data type and variable names Data dictionaries
Creating Storage Classes	Objective:Design storage classes and use them for code generation. User-defined storage classes Creating storage classes 使用用户定义的存储类 Sharing user code definitions
自定义生成的代码架构	Objective:根据应用要求控制生成的代码的体系结构。金宝app仿真软件模型架构 Controlling code partitioning Generating reusable subsystem code Generating variant components 代码展示位置选项
模型引用和总线对象	Objective:Control the data type and storage class of bus objects and use them for generating code from models that reference other models. 创建可重用的模型参考控制总线信号的数据类型 Controlling storage class of bus signals Model Reference software testing

第3天
Scheduling Generated Code Execution	Objective:在单任务，多任务处理和功能呼叫驱动配置中生成多管系统的代码。单速率和多速率系统的执行方案 Generated code for single-rate models Multirate single-tasking code Multirate multitasking code Generating exported functions
测试目标硬件上生成的代码	Objective:Use processor-in-the-loop (PIL) simulation to validate, profile, and optimize the generated code on target hardware. 硬件支持概述金宝app Arduino设置 Validating generated code on target Target optimization overview 分析目标上生成的代码 Using code replacement libraries Creating code replacement tables
Deploying Generated Code	Objective:在Arduino上创建一个工作实时应用程序^®board using provided hardware support. Embedded application architecture 创建部署线束 Using device driver blocks 运行实时应用程序外部模式
Integrating Device Drivers	Objective:生成自定义块以将设备驱动程序与Simulink和生成的代码集成。金宝app 设备驱动程序概述 Using Legacy Code Tool Customizing device driver components 开发Arduino的设备驱动程序块
Improving Code Efficiency and Compliance	Objective:Inspect the efficiency of generated code and verify compliance with standards and guidelines. Model Advisor 硬件实现参数遵守标准和指南

Guaranteed to Run

当您注册其中一个课程时，您可以依赖于任何原因不会被取消或重新安排。

MATLAB and Simulink Course Schedule

There are currently no scheduled classes for this course.