Joel Van Sickel
数学工作
内容提要
回答
for the reading pwm, what is the unit of the 200 in the block? because it can be tune more than 255.
Simulink by default can tune a constant block to any value, it does not know that the input must be limited to 255 unless you sp...
for the reading pwm, what is the unit of the 200 in the block? because it can be tune more than 255.
Simulink by default can tune a constant block to any value, it does not know that the input must be limited to 255 unless you sp...
5个tage前|0
回答
Asynchronous Machine runs in reverse when no voltage is applied.
问题是您正在将非零扭矩应用于机器。这是一个恒定的扭矩,将放置旋转福克斯...
Asynchronous Machine runs in reverse when no voltage is applied.
问题是您正在将非零扭矩应用于机器。这是一个恒定的扭矩,将放置旋转福克斯...
6 Tage ago | 0
|accepted
回答
Unable to connect input of modeled PMSM to inverter output
您好Anwesha,您可以从这里开始,不需要您自己的方程式:https://www.tatmou.com/help/physmod/sps/ug/ug/three-phase ...
Unable to connect input of modeled PMSM to inverter output
您好Anwesha,您可以从这里开始,不需要您自己的方程式:https://www.tatmou.com/help/physmod/sps/ug/ug/three-phase ...
6 Tage ago | 0
回答
Why is the Double Acting Actuator not working?
您好拉斐尔(Raphael),在此模型中需要更多信息才能知道该怎么做。当您建模流体...
Why is the Double Acting Actuator not working?
您好拉斐尔(Raphael),在此模型中需要更多信息才能知道该怎么做。当您建模流体...
6 Tage ago | 1
|accepted
回答
How to display different frequencies all at once onto the Spectrum Analyzer in Simulink?
您好Kei,第一个问题是如何产生罪恶。您使用的块将正弦输出输出到帧中,所以...
How to display different frequencies all at once onto the Spectrum Analyzer in Simulink?
您好Kei,第一个问题是如何产生罪恶。您使用的块将正弦输出输出到帧中,所以...
6 Tage ago | 0
回答
三期变化负载
The issue is how your circuit is set up. You need a snubber resistor to ground (for all three phases) because you can't have tw...
三期变化负载
The issue is how your circuit is set up. You need a snubber resistor to ground (for all three phases) because you can't have tw...
13 Tage ago | 0
回答
what type of simulations and analysis can be done using Simulink on an electric motor, battery and motor contoller
Please start with this example: //www.tatmou.com/help/physmod/sps/ug/three-phase-pmsm-drive.html;jsessionid=973818b691b...
what type of simulations and analysis can be done using Simulink on an electric motor, battery and motor contoller
Please start with this example: //www.tatmou.com/help/physmod/sps/ug/three-phase-pmsm-drive.html;jsessionid=973818b691b...
13 Tage ago | 0
回答
全桥逆变器和LLC电路的传输功能。
As there are switching devices, you either need to use averaging techniques to extract it analytically (do it by hand) or you ca...
全桥逆变器和LLC电路的传输功能。
As there are switching devices, you either need to use averaging techniques to extract it analytically (do it by hand) or you ca...
20级tage |0
回答
Some initial guidance with creating a microgrid model for typical mining application using simulink ?
Hello, Here is an example to get started: //www.tatmou.com/help/physmod/sps/ug/24-hour-simulation-of-a-vehicle-to-grid...
Some initial guidance with creating a microgrid model for typical mining application using simulink ?
Hello, Here is an example to get started: //www.tatmou.com/help/physmod/sps/ug/24-hour-simulation-of-a-vehicle-to-grid...
26 Tage ago | 0
|accepted
回答
Bidirectional converter for an energy storage system
您好,不幸的是,屏幕截图中没有足够的信息来确定出了什么问题。如果可能的话,分享...
Bidirectional converter for an energy storage system
您好,不幸的是,屏幕截图中没有足够的信息来确定出了什么问题。如果可能的话,分享...
26 Tage ago | 0
回答
How to find frequency of the signal coming from an inverter output, simulink?
您可以了解电压和当前测量输出的范围。您可以在那里进行电压尺寸...
How to find frequency of the signal coming from an inverter output, simulink?
您可以了解电压和当前测量输出的范围。您可以在那里进行电压尺寸...
ETWA 2 MONATE前|0
回答
“通用超级电容器模型”的参数是单个单元格还是整个堆栈的参数?
Hello Gokul, the first three parameters are for the super capacitor as a whole (Total). It uses the number of series and paral...
“通用超级电容器模型”的参数是单个单元格还是整个堆栈的参数?
Hello Gokul, the first three parameters are for the super capacitor as a whole (Total). It uses the number of series and paral...
ETWA 2 MONATE前|0
|accepted
回答
How can I find the source of an ssc_build() error when the stack trace doesn't list the offending file
这个:v2 = ee.additional.spice_sources.volt_pulse(v1 = { - 1e-3,'v'},v2 = {1e-3,'v'},td = {0,'s'},tr ={500e-9,'s'},tf = {500e-9,'s'},...
How can I find the source of an ssc_build() error when the stack trace doesn't list the offending file
这个:v2 = ee.additional.spice_sources.volt_pulse(v1 = { - 1e-3,'v'},v2 = {1e-3,'v'},td = {0,'s'},tr ={500e-9,'s'},tf = {500e-9,'s'},...
2 monate of |0
回答
How to measure the output impedance of single-phase and three-phase inverters connected to the grid?
I would start with this block: //www.tatmou.com/help/physmod/sps/powersys/ref/impedancemeasurement.html but more gener...
How to measure the output impedance of single-phase and three-phase inverters connected to the grid?
I would start with this block: //www.tatmou.com/help/physmod/sps/powersys/ref/impedancemeasurement.html but more gener...
2 monate of |0
|accepted
回答
连续powergui转离Powergui
You need to add a snubber to your MOSFET, try 100000, and set your time step to 1/350000/100. This system might be better model...
连续powergui转离Powergui
You need to add a snubber to your MOSFET, try 100000, and set your time step to 1/350000/100. This system might be better model...
2 monate of |0
回答
Diode color change in Simulink
Hello Abhi, unfortunately, there is not a good way to change the diode color while a simulation is running. Regards, Joel
Diode color change in Simulink
Hello Abhi, unfortunately, there is not a good way to change the diode color while a simulation is running. Regards, Joel
2 monate of |1
|accepted
回答
电子周期的混合储能系统
Hello, this type of model can be modified to have any type of converter you want, but you will have to do it yourself. Here ar...
电子周期的混合储能系统
Hello, this type of model can be modified to have any type of converter you want, but you will have to do it yourself. Here ar...
2 monate of |0
回答
有人是否模拟了功率同步控制(PSC)作为网格形成逆变器的控制MTHOD?
您好,要进行此类模拟,您首先需要Simulink和Simscape的基本技能。金宝app这里有免费课程:...
有人是否模拟了功率同步控制(PSC)作为网格形成逆变器的控制MTHOD?
您好,要进行此类模拟,您首先需要Simulink和Simscape的基本技能。金宝app这里有免费课程:...
2 monate of |0
回答
SIMSCAPE热模型误差“热温必须大于绝对零”
It is highly likely that your heat flow sensor is grounding the Air Inside FRP cabin thermall mass block. heat flow must be mea...
SIMSCAPE热模型误差“热温必须大于绝对零”
It is highly likely that your heat flow sensor is grounding the Air Inside FRP cabin thermall mass block. heat flow must be mea...
3 Monate ago | 0
|accepted
回答
为什么动态负载不起作用,静态效果很好?
Hello Tony, the dynamic load adjusts it's behavior based on input, so it is easier for it to cause a simulation to go unstable ...
为什么动态负载不起作用,静态效果很好?
Hello Tony, the dynamic load adjusts it's behavior based on input, so it is easier for it to cause a simulation to go unstable ...
3 Monate ago | 1