Get Started withCommunications ToolboxSupport Package forXilinxZynq-Based Radio

Prototype and test software-defined radio (SDR) systems usingXilinx Zynq-based radio

Communications Toolbox™ Support Package for Xilinx^®Zynq^®-Based Radioenables you to use MATLAB^®and Simulink^®to prototype, verify, and test practical wireless systems. Using this support package with a Xilinx Zynq-based development kit with an RF FMC card, you can work with live RF signals using single (1x1) or multiple (up to 4x4) transmit and receive streams. You can also implement custom hardware designs for your SDR applications using HDL Coder™ or Embedded Coder^®. This enables you to test your design under real-world conditions and rapidly prototype designs for mobile and embedded applications.

Installation and Configuration

Tutorials

Receive Tone Signal Using Analog Devices AD9361/AD9364
Perform a simple loopback of a complex sinusoid signal.
QPSK Receiver Using Analog Devices AD9361/AD9364
Receive and demodulate QPSK modulated messages.
Transmit and Receive LTE MIMO Using Analog Devices AD9361/AD9364
Generate multi-antenna LTE transmission for simultaneous transmit and receive on a single SDR device.

AboutXilinxZynq-Based Radio Design

Hardware and Software Requirements
Get an overview of supported hardware and required software products.
SDR Hardware Architecture
Overview of SDR hardware reference design.
Compatibility with Previous Releases
学习如何更新现有设计基于铁atures removed in R2020a.

Videos

Waveform Generation Using MathWorks SDR
Generate and transmit standards-compliant and custom waveforms using MathWorks^®toolboxes and SDR connectivity.

RF Signal Capture Using MATLAB and SDR
Capture RF signals off the air using SDR hardware and Communications Toolbox support packages.