Main Content

configurePlutoRadio

Configure ADALM-PLUTO radio firmware

所有的页面崩溃

Syntax

result = configurePlutoRadio(chipset)
result = configurePlutoRadio(chipset,id)

Description

example

result= configurePlutoRadio(chipset)configures the ADALM-PLUTO radio to operate in the specifiedchipsetmode. The radio must be connected to host computer USB port 0 to use this syntax.

example

result= configurePlutoRadio(chipset,id)configures the ADALM-PLUTO radio to operate in the specifiedchipsetmode and radio identifier. The radio must be connected to computer running this command.

Examples

collapse all

Connect one ADALM-PLUTO radio to the host via a USB interface. ExecuteconfigurePlutoRadiowith the input argument'AD9364'to change radio configuration to operate over the wider bandwidth and higher sampling rate.

configurePlutoRadio('AD9364')
ans = 1

Connect one ADALM-PLUTO radio to the host via a USB interface port 1. ExecuteconfigurePlutoRadiowith the input arguments'AD9364'and'usb:1'to change radio configuration to operate over the wider bandwidth and higher sampling rate for the radio connected to USB port 1 of the host computer.

configurePlutoRadio('AD9364','usb:1')
ans = 1

Input Arguments

collapse all

RF transceiver firmware configuration to be used by the PLUTO radio, specified as'AD9363'or'AD9364'. configurePlutoRadio configures the PLUTO radio to the specified firmware configuration.

RF Transceiver LO Tuning Range Bandwidth

AD9363 (factory default)

325 – 3800 MHz

20 MHz

AD9364

70 – 6000 MHz

56 MHz

Note

Analog Devices®qualifies the PLUTO radio over a tuning range of 325 MHz to 3.8 GHz. This support package enables you to use the PLUTO radio outside the qualified tuning range by configuring the radio to operate using the AD9364 firmware. To extend the frequency range, at the MATLAB®command prompt, enterconfigurePlutoRadio('AD9364').

USB port identifier, specified as a character vector indicating the host computer USB port the radio being configured is connected to.

Example:'usb:1', indicates that the radio connected to host computer USB port 1 will be configured.

Data Types:char

Output Arguments

collapse all

Outcome of ADALM-PLUTO radio configuration, returned as1if successful or0if unsuccessful.

See Also

|||

Topics

Introduced in R2017b

Communications Toolbox Support Package for Analog Devices ADALM-Pluto Radio Documentation

金宝app

Bridging Wireless Communications Design and Testing with MATLAB

Bridging Wireless Communications Design and Testing with MATLAB

Download white paper