Main Content

MATLAB Support Package for Raspberry Pi Hardware

Program sensor and image applications onRaspberry Pi

MATLAB®Support Package for Raspberry Pi™ Hardwareenables you to communicate with a Raspberry Pi remotely from a computer running MATLAB or through a web browser withMATLAB Online™. You can acquire data from sensors and imaging devices connected to the Raspberry Pi and process them in MATLAB. You can also communicate with other hardware through the GPIO, serial, I2C, and SPI pins.

The support package functionality is extended if you haveMATLAB Coder™. WithMATLAB Coder, you can take the same MATLAB code used to interactively control the Raspberry Pi from your computer and deploy it directly to the Raspberry Pi to run as a standalone executable.

Installation and Setup

Install support for the hardware, update the firmware, and connect to the hardware

Connection to Raspberry Pi Hardware

创建一个连接到覆盆子πhardware

Run on Target Hardware

Deploy a MATLAB function as a standalone executable on the hardware

LEDs

Use the Raspberry Pi’s LED

GPIO Pins

Use the Raspberry Pi’s GPIO pins

Serial Port

Use the Raspberry Pi’s serial port

I2C Interface

Use the Raspberry Pi’s I2C interface

SPI Interface

Use the Raspberry Pi’s SPI interface

能界面

Read and write CAN messages to CAN shields on Raspberry Pi hardware

Camera Board

Use the Raspberry Pi's add-on Camera Board

Sense HAT

Use the Raspberry Pi’s add-on Sense HAT Board

Web Camera

Use the Raspberry Pi web camera

Pulse Width Modulation

Use the Raspberry Pi to create pulse-width-modulation (PWM) signals on GPIO pins

Servo

Write to servo motors connected to the Raspberry Pi hardware

Linux

Use the Linux®command shell and manage files on Raspberry Pi hardware

Display

Use the Raspberry Pi’s display

Audio

Use the Raspberry Pi audio player and capture

Sensors

Read data from sensors