HDL代码生成支持金宝appinWireless HDL Toolbox

Most blocks in Wireless HDL Toolbox support HDL code generation.

The following blocks are for simulation only and are not supported for HDL code generation:

Other Blocks Supporting HDL Code Generation

Other MathWorks^®下载188bet金宝搏产品还包括blocks supported for HDL code generation that you can use to build up your design.

To create a library of HDL-supported blocks from all your installed products, enterhdllib(HDL Coder)at the MATLAB^®command line. This command requires an HDL Coder license.

You can also view blocks that are supported for HDL code generation in documentation by filtering the block reference list. ClickBlocksin the blue bar at the top of the Help window, then select theHDL code generationcheck box at the bottom of the left column. The blocks are listed in their respective products. You can use the table of contents in the left column to navigate between products and categories.

Refer to the "Extended Capabilities > HDL Code Generation" section of each block page for block implementations, properties, and restrictions for HDL code generation.

Streaming Sample Interface in HDL

The streaming sample control bus data type used by Wireless HDL Toolbox blocks is flattened into separate signals in HDL.

In VHDL, the interface is declared as:

PORT( clk : IN std_logic; reset : IN std_logic; enb : IN std_logic; in0 : IN std_logic_vector(7 DOWNTO 0); -- uint8 in1_start : IN std_logic; in1_end : IN std_logic; in1_valid : IN std_logic; out0 : OUT std_logic_vector(7 DOWNTO 0); -- uint8 out1_start : OUT std_logic; out1_end : OUT std_logic; out1_valid : OUT std_logic );

In Verilog, the interface is declared as:

input clk; input reset; input enb; input [7:0] in0; // uint8 input in1_start; input in1_end; input in1_valid; output [7:0] out0; // uint8 output out1_start; output out1_end; output out1_valid;